多级感应线圈发射器测控系统设计

将电枢加速到较高速度，通常需要多级感应线圈连续加速；而提高多级感应线圈发射器的发射效率，则要求在电枢处于驱动线圈最佳触发位置时，电容器组同步放电。同时，需要采集发射过程中电枢的速度、电源的放电电压和放电电流等数据。因此，研制合理的测控系统是多级感应线圈发射器的关键。     

A model for step‐stress accelerated life testing

Modern technology is producing high reliability products. Life testing for such products under normal use condition takes a lot of time to obtain a reasonable number of failures. In this situation a step‐stress procedure is preferred for accelerated life testing. In this paper we assume a Weibull and Lognormal model whose scale parameter depends upon the present level as well as the age at the entry in the present stress level. On the basis of that we propose a parametric model to the life distribution for step‐stress testing and suggest a suitable design to estimate the parameters involved in the model. A simulation study has been done by the proposed model based on maximum likelihood estimation. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

可靠性强化试验与加速寿命试验综述

介绍可靠性强化试验与加速寿命试验的基本概念 ,并进一步综述强化试验与加速寿命试验的国内外研究现状 ,最后对强化试验与加速寿命试验领域可能的研究方向进行归纳总结。     

合成分队双层主从决策模型研究

针对合成分队不同指挥层级之间的决策交互优化问题,提出了基于主从决策的双层武器目标分配模型。该模型能够体现上下指挥层级之间交互式决策协调优化的特点:上层目标为主攻方向我方遭受威胁最小,下层目标为对敌打击最大。结合合成分队作战决策的特点和要求,提出了一种求解该模型的改进型粒子群优化算法。仿真结果表明,该模型合理有效,改进的求解算法能够获得满意解。     

RTI测试研究

运行支撑系统(RTI)作为应用高层体系结构(HLA)进行分布仿真的支撑系统,是实现HLA的核心。RTI的功能和性能直接关系到HLA仿真系统开发与应用的成败。首先阐述了RTI测试的内容和指标,接着结合例子详细研究了RTI测试的方法,最后对RTI测试研究进行了总结,为提高基于HLA的分布交互仿真系统的质量及可信度提供了基础。     

阵列雷达自适应多零点单脉冲群目标测角算法

针对阵列体制雷达，由极大似然估计导出自适应多零点单脉冲测角原理。分析发现迭代步长过大导致双零点单脉冲技术在多目标条件下失效，因此提出加权步长改进角度估计的迭代过程，只需要较少计算量就能实现群内多个目标的精确测角。仿真结果表明：该算法在较高信噪比条件下可以精确测量群内三个目标角度，测角误差约为0.15倍波束宽度；当群目标数较多或者目标相位差接近于0时，算法性能下降明显。     

装备剩余寿命预测平行仿真中模型动态演化方法

装备平行仿真中的一个重要概念是实时数据驱动的模型动态演化,但是至今仍缺乏具体应用领域的实现方法。以带未知离散冲击的混合退化装备剩余寿命预测为背景,以多态Wiener状态空间模型为演化对象,提出一种装备平行仿真中模型动态演化方法,包括基于交互多模型强跟踪滤波的模型软切换和基于期望最大化算法的模型参数在线估计,并实现了基于平行仿真的装备剩余寿命实时预测。利用某轴承退化数据进行实例研究,结果表明该方法能有效提高仿真逼真度,剩余寿命预测的准确度较高、不确定性较小,具有较高工程应用价值。     

Fabrication of AA7005/TiB2-B4C surface composite by friction stir processing: Evaluation of ballistic behaviour

The present work aims to enhance the ballistic resistance of AA7005 alloy by incorporating the TiB₂ and B₄C ceramic reinforcement particles. Surface composites with different weight fractions of TiB₂ and B₄C particles were processed by friction stir processing. Micro-hardness and depth of penetration tests were carried out to evaluate the ballistic properties of the surface composites. The surface hardness of the composite was found to be nearly 70 HV higher than base alloy. The depth of penetration of the steel projectile was 20–26 mm in the composites as compared to 37 mm in the base alloy. Ballistic mass efficiency factor of the surface composite was found to be 1.6 times higher than base alloy. This is mainly attributed to the dispersion strengthening from the reinforcement particles.     

The building evacuation problem with shared information

In this article, the Building Evacuation Problem with Shared Information (BEPSI) is formulated as a mixed integer linear program, where the objective is to determine the set of routes along which to send evacuees (supply) from multiple locations throughout a building (sources) to the exits (sinks) such that the total time until all evacuees reach the exits is minimized. The formulation explicitly incorporates the constraints of shared information in providing online instructions to evacuees, ensuring that evacuees departing from an intermediate or source location at a mutual point in time receive common instructions. Arc travel time and capacity, as well as supply at the nodes, are permitted to vary with time and capacity is assumed to be recaptured over time. The BEPSI is shown to be NP‐hard. An exact technique based on Benders decomposition is proposed for its solution. Computational results from numerical experiments on a real‐world network representing a four‐story building are given. Results of experiments employing Benders cuts generated in solving a given problem instance as initial cuts in addressing an updated problem instance are also provided. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

基于效果的装备保障合同商选择方法

基于效果的合同商装备保障是将基于效果的维修理念应用于合同商装备保障领域提出的一种装备保障策略,更加关注装备的作战效能,同时对合同商提出了更高要求,因此,选择恰当的合同商对于实现预期结果显得更为重要。而合同商选择是一个多准则决策问题,很大程度上依赖于决策者和决策条件状态的不确定性和模糊性。构建了一个基于效果的合同商选择系统流程,并提出了基于相似度的模糊TOPSIS法,简化了计算流程,最后通过一个具体案例来验证该方法的有效性。